SSQ4 Gas Blowback Rifle

A pre-upgraded M4 with both GBBR & HPA setup available. It provides realistic blowback action and recoil, combined with top performance thanks to its internals. It’s the most real steel-like rifle in our arsenal, with a two-toned aesthetic that makes it stand out.

SSQ4 Features:

• • GBBR & HPA variants out of the box

  • Convertible between HPA & GBBR 

  • Half-bolt for gas efficiency and snappy blowback action

  • Mid-cap HPA (125 BBs) | Real cap Gas mag (32 BBs)

  • Power adjustable through integrated NPAS

  • Tool-less TDC click-based hop-up adjustment on the top rail

  • Integrated HPA module (HPA variant only)

  • High fire rate: 20RPS

  • Beautiful bronze finish

  • Solid, full metal construction

  • Steel controls & trigger internals

  • Maple Leaf 60° bucking for heavy BBs

  • Completely ambidextrous

  • Ready for Picatinny folding stock adapter

  • Grip with beaver tail and internal magnet to store tools

    ‍ ‍Specs

    • Muzzle energy: Adjustable from ~1J to 2.5J
      Fire rate: 20rpsMagazine capacity: 32 BBs (gas) | 125 BBs (HPA)
      Weight (with mag): 5.42lbs (gas) | 5.73lbs (HPA)
      Overall Length: 27.6in stock collapsed | 30.8in stock extended
      Inner barrel diameter: 6.03mm
      Inner barrel length: 278mm
      Thread: 14mm CCW
      Gas magazine: 1-stage fill valve

      What’s in the box

    • SSQ4

    • Magazine

    • NPAS Allen key

    • Spare recoil rod

    • Standard rocket valve & rocket valve spacer (version dependent)

    • Cleaning rod

    • Safety booklet

    Check out: BB weight recommendations

    For the HPA variation, we recommend between 120-160 PSI.

    ‍ ‍Additional warnings

     All power (Joules) variants were measured with 0.32g BBs. Power is adjustable at all times.

     Comes with a US-Spec HPA connector (HPA Variant).

     Allow a break-in period of ~200 BBs for the gun to settle in.

    Avoid pulling the trigger without a magazine inserted. The magazine provides support for the valve knocker, extending its lifetime (Gas variant).

     Only connect the HPA line with an open bolt to prevent a negligent discharge. See the Academy safety video for more information.

     Bolt lockback function on HPA version might not lock back reliably out of the box as the system is fine-tuned to the gas variant. HPA bolt lockback will get better over a break-in period. 

     For the HPA variation, we recommend between 120-160 PSI.

    Steel Full Bolt for extra recoil currently in development